Products | Suppliers | 登录 | 注册 | 外贸论坛
ROSCHEN GROUP
Quality Changes The World!
Verified Supplier

5 Years

Home > Products > Down The Hole Drilling >

Overburden Drill Bit overburden drilling system 70mm - 400mm OD

ROSCHEN GROUP

City: shanghai

Province/State:shanghai

Country/Region:china

Contact Person:MrBill, George, Michael View Contact Details

Overburden Drill Bit overburden drilling system 70mm - 400mm OD

Brand Name : ROSCHEN
Model Number : 70 mm - 400 mm
Certification : ISO
Place of Origin : GERMANY
MOQ : 1
Price : $60
Supply Ability : 300 pcs per month
Packaging Details : wooden box, carton
System : toughest overburden drilling system
Drilling : mitsubishi overburden drilling system
Manufacturer : overburden drilling Manufacturer
Item No : symmetrix drilling system
Casing : symmetrix casing system
China : China drilling system
Type : numa drilling system
Origin : China concentric drilling systems
Accessories : Overburden Drill Systems and Accessories
Drill Bit : Overburden Drill Bit overburden drilling
Contact Now

Overburden Drill Bit overburden drilling system 70mm - 400mm OD



Details Description:


The Stratex Drill System

The Stratex Drill System (SDS) is an overburden drilling system designed for conditions where a cased hole is required. Collapsing holes tend to make overburden drilling expensive, with lost drilling equipment and down time.


In cooperation with drillers and drilling contractors, the SDS was developed to overcome these problems. The patented eccentric design and the Drop Off Ring (DOR) drill bits enable the drill string and casing to be lowered in the hole simultaneously with a conventional hammer drilling system.


The SDS eccentric designed bit rotates outward and drills a larger diameter hole than the casing, avoiding cave-ins, wash-outs, and other problems common in normal drilling operations in soft and gravel-type strata or loose rock. Since 90% of the world's overburden drilling is in loose strata, potential utilization of the SDS is enormous.


After reaching the designated depth, the SDS reamer-bit is retracted by reversing the direction of the rotation and by applying tension on the reamer-bit, which has a taper and will retract into the casing for easy removal of the entire drill-string. This leaves the casing in place for other applications or for removal at a later date. The SDS method is designed for use with flush joint threaded pipe or welded-type casing and provides a bit size for a wide variety of different casing wall thicknesses.


Advantages of SDS:


Low capital investment

High drilling performance

No rotation of the casing

Compatible with most drilling rigs

Virtually no casing stress

Casing is simultaneously lowered by the guide device and to deeper depths than other methods allow

Cost and on-site time reduced due to better penetration rates, easier bit changes, and stable hole conditions

Smaller pilot bit for faster and better penetration


Applications:


Blast holes

Water supply wells

Bridge and building foundations

Standard slant or horizontal drilling

Mining air holes

Environmental monitoring wells

Grouting operations

Seismic shot holes

Soil sample and geotechnical applications

Ground anomaly and tiebacks

Storage caverns and dam


Accessories Available with SDS:


Drop Off Ring (DOR)

Drill pipe and subs

Threaded casings

Casing drive shoes

Hydraulic casing pullers

Stabilizers

Discharge heads

Casing wing-nuts

Shock subs

Drill bits

Fishing tools

Air swivels


Overburden Drill System


Assembly of the Stratex System


The Stratex Drilling Method is used with air rotary drilling rigs and most manufacturers' downhole hammers. The drill rod is connected to the rig top drive using a changeover sub or swivel sub. The drill rod is then connected to the down-hole hammer by the same method. The chuck nut and split rings are removed to insert the guide device shank and secured by replacing the split rings and chuck nut.

The reamer bit, in the closed position, is now inserted into the casing shoe. Since the percussion hammer is at the bottom of the hole, working directly above the drill bit, the force to pull down the casing tube is transferred by way of the casing shoe. The exhaust air from the drill redirects the loose cuttings up through the groves on the guide device, forcing them up between the drill rod and the casing wall out through the discharge head, which is attached to the casing tube. By using a discharge head, drilling is not only safer but also environmentally cleaner. Stratex can be used with foam or water to aid in cutting removal.


Good Flushing


Good Flushing is essential with any successful drilling operation or in using an overburden drilling system. The Stratex System provides air jets above and below the guide device, creating a vacuum across the face of the reamer bit, removing the cuttings with greater annular velocity. The gauge carbides along the side of the pilot and reamer bit act to crush the cuttings into finer particles, the majority of which are removed from the hole. The remaining cuttings are forced back into the walls of the cavity, leaving less material to be extracted from the hole.


Advantages:

  • Efficient removal of cuttings from above the guide device, which prevents the hammer from jamming and torque problems
  • Removal of fine cuttings from around the bit system and casing creates less friction and achieves deeper depths and easier casing removal
  • Reduction in losses due to circulation problems by increased vacuum in cutting removal
  • For unique applications, the annular velocity can be increased by changing the airflow in the reamer pilot system

  1. One-piece reamer and pilot bit
  2. One-piece guide device and shank
  3. Casing with shoe sleeve
  4. Casing
  5. Wing-nut centralizing system
  6. Drill rod
  7. Casing adapter
  8. Discharge head
  9. Swivel sub


Air velocity is important for efficient hole cleaning. A minimum return air velocity of 4000 feet per minute is desirable. Annular space between drill pipe and the drilled hole as well as compressor capacity determines the air velocity. The annular air velocity in foot per minute can be calculated with the following formula if air consumption and annular area are known:


annular air velocity (fpm) =

free air consumed (cfm) x 144


annular area (sq. in.)*


*annular area = .7854 x (hole diameter - drill pipe OD)

The following flushing mediums are also useful:

  • Air with water injection
  • Air with foam injection

NOTE: Foam has the ability to lift cuttings and stabilizes the wall of the hole and provides lubrication for easier casing penetration. Foam also has good drilling performance in most types of clay.



The Stratex Drill System

Drilling Rod


Wiper Cover
Wipers

Discharge Body

Discharge Clamp
Adapter

Blank Casing End

Adapter Clamp

Replaceable Grippers

Pin End

Box End

Casing

Hammer Shank

Guide Device

Casing Shoe

Reamer Bit

The Stratex System utilizes a one-piece reamer and pilot bit that moves outward to full open position on an eccentric shaft by rotating a half turn to the right.

This reamer pilot bit system opens a larger diameter hole than the diameter of the casing. The casing is simultaneously lowered into the hole as the reamer pilot bit drills. The pilot bit is rotated at 10 to 40 rpm while drilling with the hammer.

When the designated drilling depth is reached, the reamer pilot bit system is retracted into the casing by applying slight tension and reversing the direction of the drilling rotation. The design of the reamer pilot bit system incorporates a closed bearing method that makes the loss of the pilot bit virtually impossible. This bit system, in the closed position, is easily removed through the casing shoe and casing.

Working
Position

Retracted
Position

Telescopic Drilling


Using a telescoping drilling method can achieve deeper depths.

Some string samples are as follows:

365

240

190

140

90


365

215

165

115



365

215

140

90


Casing depths with Stratex can reach 500 feet or more with the down-hole hammer versions depending on the type of formation, drilling equipment, and drilling personnel experience.


Hole Depth


Stratex System (mm)

70

80

90

115

140

165

190

215

240

365

Normal Max - Hole Depth (ft)

200

250

300

500

500

500

500

-

-

-

The Stratex Drilling Method

The Ultimate Drilling Method

The Overburden Drilling Method that was designed by drillers for drillers. Overburden material strikes when least expected. Be prepared. Use Stratex!

The PATENTED Stratex Drill System:


1. One-piece shank and guide device manufactured from the highest quality material with stringent quality control.

2. Air jets are used to prevent any malfunction of the opening and retraction of the reamer pilot bit operation and the clearing of cuttings above the reamer pilot bit system.

3. Sealed bearing system for ease in rotating the eccentric bit outward or retracting it into the casing.

4. Casing with shoe: Casing may be supplied with plain or threaded ends.

5. Grooved bypass directly above the lock system to clear cuttings and ensure complete drilling face contact.

6. Tapered shoulder on the reamer bit eliminates casing binding and assists in the retracting of the reamer bit into the casing.

7. One-piece reamer and pilot bit manufactured from the highest quality material, with stringent quality control.

8. Gauge protection carbides on heavy duty, one-piece pilot and reamer bit.

9. Dome carbides on heavy duty pilot and reamer bit.


The ROSCHEN

DROP-OFF RING UNDER REAMER

Used when concentric drilling is a requirement:

  • High performance drilling
  • One-piece reamer
  • One-piece guide device
  • Made from tough heat-treated alloy steel
  • Studded with an aggressive array of tungsten carbide inserts
  • Lower drilling costs per foot
  • Guaranteed performance*
  • Guaranteed service
  • Large range of accessories
  • Manufactured under strict quality-controlled conditions

*When used in conjunction with manufacturer's recommendations and specifications.


Drop-Off Ring Under Reamer

Tool
Size

Casing
OD (IN)
a

Nominal
Casing Size
(IN)

Casing
Wall

Casing
Show i/d
b

Hole
Dia.
c

70 mm

3.5

3.0

.216

2.75

3.75

80 mm

4.0

3.5

.266

3.125

4.875

90 mm

4.5

4.0

.237

3.625

5.0

115 mm

5.563

5.0

.258

4.5

6.125

140 mm

6.625

6.0

.280

5.5

7.5

165 mm

7.625

7.0

.301

6.5

8.75

190 mm

8.625

8.0

.322

7.5

9.75

210 mm

9.625

9.0

.342

8.350

11.0

215 mm

10.0

9.5

.350

8.625

11.125

240 mm

10.75

10.0

.365

9.525

11.25



TOOLS OF EXCELLENCE AND DURABILITY FOR OVER 30 YEARS

Recommended Maximum Air Pressure for Stratex Drill Systems

The maximum recommended air pressure for Stratex drilling with down-hole hammers is 12 bar, which equals 210 psi.

Rotation speed depends on the size of the Stratex bit and the formation being drilled. The rotation speed may have to be varied as the formation changes. The table shows recommended rotation speeds for the various Stratex sizes.


Recommended Rotation Speeds

Stratex System (mm)

70

80

90

115

140

165

190

215

240

280

Speed (rpm)

20 - 40

10 - 25

Drill rigs must have sufficient torque for drilling with Stratex. The table shows recommended rotation speeds for the various Stratex bit sizes.

Hole Depth

Stratex System (mm)

70

80

90

115

140

165

190

215

240

280

Minimum Torque (ft/lb)

570

600

663

1470

2200

2950

4000

4000

4000

7000

"ROSCHEN provides the widest range of flexibility when it comes to casing wall size
thickness, which makes it a high demand by users. All systems complete and ready for
resale within a week or two, a time frame that cannot be met by other manufacturers."


Stratex Over Burden Drilling Tool: Size and Technical Chart

Tool Size

Casing Sizes

Drive Shoe I.D.
(B)

Drive Shoe Length
(C)

Guide to Casing Distance
(D)

Reamed Diameter
(E)

Bit
Size
(F)

Guide to Casing Distance
(D)

Nominal Size

O.D.
(A)

Walls
(S)

70

3

3.50

.216

2.750

2.5

4.25

3.75

2.75

2.968

80

3.5

4.0

.237

3.156

2.75

4.5

4.375

3

3.437

90

4

4.5

.247

3.650

3.5

5

5

3.5

3.937

110

5

5.562

.375

4.375

5.5

7.50

6.125

4.25

4.75

115

5

5.562

.258

4.575

5.5

7.50

6.125

4.25

4.937

132

6

6.625

.432

5.188

5

7.75

7.5

4.875

5.593

140

6

6.625

.280

5.575

5

7.75

7.5

5.125

5.937

142

7

7

.498

5.575


Product Tags:

drill pipes

      

dth hammers and bits

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Overburden Drill Bit overburden drilling system 70mm - 400mm OD Images

Send your message to this supplier
From:
Enter your email please.
To: ROSCHEN GROUP
Subject:
Message:
Characters Remaining: (0/3000)
 

Français| Русский язык| Español| Português| 日本語

Home| Products| Suppliers| Site Map| About Us| Contact Us| Help| 关于我们| 联系我们

Copyright © 2009 - 2017 everychina.com. All rights reserved.

Inquiry Cart 0